🌻An electrolytic capacitor differs significantly from other types in that its dielectric is an extremely thin anodic oxide film electrolytically generated on the valve metal, the thickness of which is closely related to the applied voltage. The oxide film is the heart part of the electrolytic capacitor, and its quality is related to the product performance, [...]
Different from other chip components, use of multilayer ceramic capacitors may be damaged due to large stress due to the thin internal electrodes and dielectrics, and the dielectric is very brittle: the combination of internal electrodes and terminal electrodes use of multilayer ceramic capacitors is also relatively Fragile. Therefore, relevant precautions should be observed when soldering [...]
🌕This article is about the failure analysis of ceramic capacitors, which may fail in different environments. 1.Influence of humidity on deterioration of electrical parameters 🌝When the temperature in the lost air is too high, the water film condenses on the surface of the capacitor shell, which can reduce the surface insulation resistance of the capacitor. In [...]
1 Frequency Characteristics of Ceramic Capacitors 🍏1.1 Q value and frequency characteristics of ceramic capacitors The capacitance of the first type of ceramic capacitors (such as COG) is substantially invariant with frequency over the entire usable frequency range. Q value and resonant frequency are important indicators when high-frequency/ultra-high-frequency capacitors are used in bad resonant circuits. High-frequency/ultra-high-frequency [...]
Electrolytic capacitors aluminum foil corrosion process is widely used in industrial production.In actual industrial production, the tunnel corrosion process is generally used, including the steps of pre-stage chemical treatment → pre-stage electrolytic corrosion → post-stage electrolytic corrosion → post-stage chemical treatment. 1 Tunnel etching process ✨1.1 Pre-chemical treatment The annealed electrolytic capacitors aluminum foil sample generally [...]