Technical Guides

Selection guides, in-depth tutorials and technical parameters

The main points of manufacturing process of multilayer ceramic capacitor

The manufacturing process of multilayer ceramic capacitor is as follows: (1) Raw materials should be selected Factors affecting the quality of high-voltage multilayer ceramic capacitor, in addition to the composition of porcelain, optimization of process manufacturing, strict process conditions are very important. Therefore, both the cost and the purity should be considered for the raw materials. [...]

2019-03-05T09:13:04+00:00Categories: Technical Guides|Comments Off on The main points of manufacturing process of multilayer ceramic capacitor

High Voltage Ceramic Capacitors: Dielectrics, Ratings and Selection

A high voltage ceramic capacitor is a single-layer disc or tubular ceramic part rated for mains-derived and much higher voltages, typically from 1 kV DC up to 50 kV DC. It uses the same barium titanate based ceramics as an ordinary ceramic capacitor, but with a much thicker dielectric layer between the electrodes, which is what [...]

2026-10-05T07:03:31+00:00Categories: Technical Guides|Tags: , , , |Comments Off on High Voltage Ceramic Capacitors: Dielectrics, Ratings and Selection

It is expected that the market for aluminum foil materials for aluminum electrolytic capacitors will continue to prosper

1. The current market for aluminum foil materials for aluminum electrolytic capacitors has a high degree of prosperity. Can it continue? A: In terms of demand, the global electronic information industry has developed rapidly, which has greatly promoted the development of aluminum electrolytic capacitors and their downstream industries. It is used in the fields of energy-saving [...]

2018-07-20T09:37:19+00:00Categories: Technical Guides|Comments Off on It is expected that the market for aluminum foil materials for aluminum electrolytic capacitors will continue to prosper

Alcoa to resume its Warrick smelting business this summer

Alcoa, the world’s sixth-largest aluminium producer headquartered in Pittsburgh, Pennsylvania, USA, has begun work to restore its smelter in southwestern Indiana this summer, and has hired workers for it. The Pittsburgh-based company announced at the end of March 2016 that it would permanently shut down its Warrick Operations smelter and that it would be powerless because [...]

2018-05-25T04:59:47+00:00Categories: Technical Guides|Tags: |Comments Off on Alcoa to resume its Warrick smelting business this summer

Title

Go to Top